In early 2026, a Middle East civil engineering contractor contacted Jinlida through an online inquiry. The company specializes in slope protection, riverbank reinforcement and highway retaining structures across the Gulf region — markets where gabion boxes have become the default solution for erosion control, flood defence and landscaping works.
Until then, the client had been importing finished gabion boxes from regional traders. Rising freight costs, long lead times and inconsistent mesh quality pushed the company to bring production in-house. Their requirement was unusually clear: they did not want a multi-specification machine. They needed one single mesh opening, run at very high volume, feeding a single standard gabion box size across all of their projects.
After three weeks of technical exchange and two rounds of video factory inspection, the order was placed for a Jinlida CNC gabion mesh machine — model JLD-GM series — configured for single mesh opening production at 9,000 m² per 12 hours.
The machine was configured for one mesh specification only: a 100 × 120 mm hexagonal opening for standard 2 m × 1 m × 1 m gabion boxes. Removing dual-specification changeover hardware shortened the machine, simplified the CNC program and pushed output capacity to its maximum.
| Parameter | Specification |
|---|---|
| Mesh type | Double-twist hexagonal wire mesh |
| Mesh opening | 100 × 120 mm (single mesh opening) |
| Wire diameter range | 2.0 mm – 4.0 mm (PVC coated & galvanized) |
| Max mesh width | 2000 mm |
| Output capacity | 9,000 m² per 12 hours |
| Control system | CNC PLC with touch screen, servo-driven |
| Motor power | 11 kW main drive |
Because the client's facility sits inland in a desert-industrial zone, logistics and service planning were treated as part of the project.
The client reported stable output in the second week of running a 12-hour production shift. Because the line produces a single mesh opening with no changeover, the trained operators ran at full capacity from the start.
Three factors decided the order. First, single-specification high-volume output matched the client's project pipeline, and Jinlida quoted capacity in m² per 12-hour shift. Second, the machine is engineered for high-temperature operation, with oversized cooling and industrial-grade servo components for continuous duty in Gulf climates. Third, Jinlida committed engineers on site for installation and operator training, not remote guidance.
The client is now planning a second unit for a separate production site.
Bringing gabion mesh production in-house only works when machine quality is matched by proper installation support.
Jinlida supplies CNC gabion mesh machines, gabion box production lines and complete tooling to contractors across the Middle East, Africa, Southeast Asia and South America, with pre-shipment testing, on-site installation and operator training included as standard.
In early 2026, a Middle East civil engineering contractor contacted Jinlida through an online inquiry. The company specializes in slope protection, riverbank reinforcement and highway retaining structures across the Gulf region — markets where gabion boxes have become the default solution for erosion control, flood defence and landscaping works.
Until then, the client had been importing finished gabion boxes from regional traders. Rising freight costs, long lead times and inconsistent mesh quality pushed the company to bring production in-house. Their requirement was unusually clear: they did not want a multi-specification machine. They needed one single mesh opening, run at very high volume, feeding a single standard gabion box size across all of their projects.
After three weeks of technical exchange and two rounds of video factory inspection, the order was placed for a Jinlida CNC gabion mesh machine — model JLD-GM series — configured for single mesh opening production at 9,000 m² per 12 hours.
The machine was configured for one mesh specification only: a 100 × 120 mm hexagonal opening for standard 2 m × 1 m × 1 m gabion boxes. Removing dual-specification changeover hardware shortened the machine, simplified the CNC program and pushed output capacity to its maximum.
| Parameter | Specification |
|---|---|
| Mesh type | Double-twist hexagonal wire mesh |
| Mesh opening | 100 × 120 mm (single mesh opening) |
| Wire diameter range | 2.0 mm – 4.0 mm (PVC coated & galvanized) |
| Max mesh width | 2000 mm |
| Output capacity | 9,000 m² per 12 hours |
| Control system | CNC PLC with touch screen, servo-driven |
| Motor power | 11 kW main drive |
Because the client's facility sits inland in a desert-industrial zone, logistics and service planning were treated as part of the project.
The client reported stable output in the second week of running a 12-hour production shift. Because the line produces a single mesh opening with no changeover, the trained operators ran at full capacity from the start.
Three factors decided the order. First, single-specification high-volume output matched the client's project pipeline, and Jinlida quoted capacity in m² per 12-hour shift. Second, the machine is engineered for high-temperature operation, with oversized cooling and industrial-grade servo components for continuous duty in Gulf climates. Third, Jinlida committed engineers on site for installation and operator training, not remote guidance.
The client is now planning a second unit for a separate production site.
Bringing gabion mesh production in-house only works when machine quality is matched by proper installation support.
Jinlida supplies CNC gabion mesh machines, gabion box production lines and complete tooling to contractors across the Middle East, Africa, Southeast Asia and South America, with pre-shipment testing, on-site installation and operator training included as standard.
